|
|
---|
NOTE
|
About the menu options in the following chart
Default settings are highlighted in bold.
The settings marked with "*4" cannot be imported or exported via the Remote UI.
For settings or values with "*5" mark, the setting or value may be unavailable or vary depending on the country where you are using the machine.
For Settings or values with "*7" mark, the default setting varies depending on the country where you are using the machine.
Settings or values with "*8" mark appear only in MF8380Cdw/MF8360Cdn.
|
Settings
|
Descriptions
|
|
Register Unit Telephone Number
|
You can register the fax number of the machine.
See the Starter Guide.
|
|
Select Line Type*5
|
Select a line type.
|
|
Off-Hook Alarm
|
You can specify whether to sound a warning tone when the handset of the external telephone or the optional handset is off the hook.
|
Settings
|
Descriptions
|
|
Change Defaults
|
You can register scan settings for documents.
|
|
Register Unit Name (Fax)
|
Register your name or company's name (sender's name).
See the Starter Guide.
|
|
ECM TX
|
You can specify whether to use ECM.
"ECM TX"
|
|
Pause Time
|
You can specify the number of seconds for the pause time.
|
|
Auto Redial
|
You can specify whether to redial when fax documents cannot be sent.
|
|
Redial Times
|
You can specify the number of times to redial.
|
|
Redial Interval
|
You can specify the interval between redials.
|
|
Redial When Err Occurs
|
You can specify whether to redial when a send error occurs.
|
|
Sender ID
|
Specifies whether to add the sender information to the documents you send.
|
|
Print Location
|
Select the location where the Sender ID is printed.
|
|
Mark No. as: TEL/FAX
|
Select the text to add in front of the number.
|
|
Check Dial Tone Before Sending
|
You can specify whether to dial after checking the dial tone when sending fax documents.
|
Settings
|
Descriptions
|
|
ECM RX
|
You can specify whether to use ECM.
"ECM RX"
|
|
Incoming Ring
|
Specify whether or not the external telephone or the optional handset rings on an incoming call when <RX Mode> is set to <Auto> or <Fax/Tel Auto Switch>.
|
|
Remote RX
|
You can specify whether to use the "remote receiving function" enabling you to receive fax documents by dialing an ID number even in the middle of a telephone call.
|
|
Auto RX Switch
|
Set the incoming call ring time before the machine switches to the fax mode automatically. This option can be enabled when the <RX Mode> is set to <Manual>.
|
Settings
|
Descriptions
|
|
2-Sided Printing*8
|
Enable this option to print on both sides of paper. This saves excessive paper consumption.
|
|
Reduce RX Size
|
You can reduce the size of received documents and print them.
|
|
RX Page Footer
|
You can specify whether to print information such as reception date when printing received documents.
|
|
Continue Printing When Toner Is Low
|
Specify whether to continue printing received documents when the toner is nearly empty.
|