Installing Using [Custom Installation] (For Windows)
1
Insert the User Software CD-ROM into the slot on your computer.
2
Click [Custom Installation].
 If the above CD-ROM/DVD-ROM Setup screen does not appear:
Windows XP and Server 2003
1.
From the [Start] menu, select [Run].
2.
Enter "D:\MInst.exe", and then click [OK].
Windows Vista, 7, and Server 2008
1.
Enter "D:\MInst.exe" in [Start Search] or [Search programs and files] under the [Start] menu.
2.
Press the [ENTER] key on the keyboard.
Windows 8 and Server 2012
1.
Right-click the lower-left corner of the screen and select [Run].
2.
Enter "D:\MInst.exe", and then click [OK].
*
The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive name may differ depending on the computer you are using.
 If the language selection screen is displayed before the CD-ROM/DVD-ROM setup screen appears:
Select the language and click [OK].
3
When the following screen appears, select the connection method to a computer.
For USB Connection:
Select [USB Connection], and click [Next].
For Network Connection:
Select [Network Connection], and click [Next].
NOTE
Windows Server 2003/Server 2008/Server 2012:
This screen is not displayed. Proceed to the following procedure.
4
Select the check box next to the application you want to install and click [Install].
5
Read the License Agreement and click [Yes].
6
Click [Next].
The following screen appears. Click [Yes].
For USB Connection:
Proceed to step 13.
For Network Connection:
Proceed to step 7.
7
Select the machine to be installed.
(1)
Select the machine.
(2)
Click [Next].
 If no machines are displayed in [Device List]:
Perform the following procedure.
1.
Check the following.
The computer and machine are connected via the network.
The machine is turned on.
The IP address is set correctly.
The computer and machine are on the same subnet.
Security software has been exited.
2.
Click [Update Device List].
If any machines are not displayed by performing the above procedure, perform the following procedure.
1.
Click [Search by IP Address].
2.
Enter the IP address of the machine to be installed.
If the IP address of the machine is between "169.254.1.0 and 169.254.254.255", the IP address is the one assigned by the AutoIP function.
If an IP address other than link-local addresses is set for the computer, set an IP address in the same subnet as the computer (other than link-local addresses) also for this machine manually.
This enables the installer to search for this machine.
 
3.
Click [OK].
8
Select the function you want to use.
(1)
Select the function you want to use (driver to be installed).
(2)
Click [Next].
[Printer]
Select when using the print function.
[Fax (for Supported Models)]
Select when using the PC fax function. (This function sends documents or images that were created on a computer directly as a fax transmission.)
[Scanner]
Select when using the scan function.
If another Select Driver screen is displayed, repeat this step until the Confirm Settings screen is displayed.
9
Set the printer or fax information.
(1)
Specify the settings for each option as needed.
(2)
Click [Next].
Printer information*1
Fax information*2
*1
Appears if you selected [Printer] in step 8.
*2
Appears if you selected [Fax (for Supported Models)] in step 8.
[Printer Name]
Enter a new name if you want to change the printer or fax name.
[Fax Name]
[Use as Shared Printer]
Select the check box to share the printer or fax.
[Use as Shared Fax]
[Shared Name]
Change the shared name as needed.
NOTE
If you selected the [Use as Shared Printer] or [Use as Shared Fax] check box:
Install the additional driver as follows.
1.
Click [Drivers to Add].
2.
Select the operating system displayed in [Drivers to Add].
3.
Click [OK].
If a 64-bit operating system is running on a computer on which the installation is being performed, the download installation (installation from a network) for a client computer on which any of the following 32-bit operating systems is running is not supported due to a Windows restriction.
 
Windows XP (on which no service pack or SP1 is installed)
Windows Server 2003 (on which no service pack is installed)
If you download and install the software on any of the above 32-bit operating systems, you may fail to install the software.
If any of the following 32-bit operating systems is running on a computer on which the installation is being performed, the additional driver for a 64-bit operating system cannot be installed.
 
Windows XP (on which no service pack or SP1 is installed)
Windows Server 2003 (on which no service pack is installed)
If you download and install the software on any of the above 64-bit operating systems, you may fail to install the software.
10
Check the displayed information, and click [Start] to start installation.
 
 
 
 
 
11
Select the machine you would like to make your default printer.
(1)
Select the machine you would like to make your default printer.
(2)
Click [Next].
This screen appears only when installing the printer driver and fax driver.
12
Select to print a test page.
(1)
Select the check box to print a test page.
(2)
Click [Next].
This screen appears only when installing the printer driver and fax driver.
13
Click [Exit].
For USB Connection:
For Network Connection:
Next, installation of MF Toolbox starts.
In any of the following cases, MF Toolbox is not installed.
If you are using Windows Server 2003/Server 2008/Server 2012. Proceed to step 17.
If you did not select the [MF Toolbox] check box in step 4. Proceed to step 16.
14
Click [Next].
The screens for specifying a location in which the MF Toolbox is installed and position to which the start menu is added appear.
Specify the settings in the respective screens, and then click [Next]. Click [Start] in the displayed screen.
15
Click [Exit].
The software for which the check box was selected in step 4 is installed.
Follow the on-screen instructions.
16
If you selected Manuals in step 4, installation of the manuals starts.
Follow on-screen instructions to install the manual.
17
Confirm that the applications are selected [] under [Install] and click [Next].
18
Restart your computer.
(1)
Select the [Restart Computer Now (Recommended)] check box.
(2)
Click [Restart].
Remove the CD-ROM once this screen appears.
In the case of USB connection, wait until your computer is restarted.
In the case of network connection, check the installation results.
» Installing the MF Drivers and MF Toolbox » Installing Using [Custom Installation] (For Windows)
0H1R-006