MG3200 series

This section describes check and troubleshooting procedures for the following items:

Checking the MAC address

If an error occurs in the scanner

 

Checking the MAC address

To check the MAC address of the machine, perform the operation described below.

(1) Load the paper.

(2) On the Operation Panel of the machine, press the Maintenance button repeatedly until the LED displays the following:

(3) Press the Color or Black button.
The machine starts printing the network setting information.

(4) Check the [MAC Address] from the printed network settings.

TOP

 

If an error occurs in the scanner

If a problem occurs with the machine while the scanner is being used, the following message is displayed in the driver window.

Error in scanner.
Turn off scanner and follow instructions in User's Guide.
Scanner driver will be closed.

 

Perform the operation described below.

Check that the machine and the computer are properly connected.

Uninstall ScanGear, and then re-install it.

Restart the computer, and reconnect the machine.

For information about installing (uninstalling) ScanGear, see the Installation (Uninstallation) page in "Setup".

If the problem is not resolved, contact the service center.

TOP