![]() |
|
The machine's IPv4 address can be either assigned automatically by a dynamic IP addressing protocol, such as DHCP, or entered manually. When connecting the machine to a wired LAN, make sure that the connectors of the LAN cable are firmly inserted into the ports (Connecting to a Wired LAN). You can test the network connection if necessary.
|
1
|
Select <Auto Acquire>
![]() ![]() |
2
|
Select <DHCP>, and press
![]() ![]() ![]() If you do not want to use DHCP/BOOTP/RARP to assign an IP address
Select <Off>, and press
![]() ![]() |
3
|
Check that <Auto IP> is set to <On>.
If <Off> is selected, change the setting to <On>.
|
4
|
Select <Apply>, and press
![]() |
1
|
Check that <Auto Acquire> is set to <Off>.
![]() If <On> is displayed, select <Auto Acquire>, press
![]() |
2
|
Select <Manually Acquire>, and press
![]() |
3
|
Specify the IP address, subnet mask, and gateway address (or default gateway).
Specify the settings in the following order: <IP Address>
![]() ![]() Enter each setting using the numeric keys, and press
![]() ![]() |
![]() |
Checking whether the settings are correctMake sure that the Remote UI screen can be displayed with your computer (Starting Remote UI). If a computer is not available, you can check the connection by using the operation panel (Testing the Network Connection).
If you changed the IP address after installing the printer driverYou need to add a new port. Configuring Printer Ports
|